Proportional Directional Control Valve, with Auxiliary Lever Override

PRMR2-06

Q max. l / min (GPM)	P max. bar (PSI)	Size
40 (11)	350 (5076)	Size 06 (D03)

Q max. l / min (GPM)	40 (11)
P max. bar (PSI)	350 (5076)
Size	Size 06 (D03)

Description

Direct acting proportional directional control valve with subplate mounting interface acc. to standards ISO 4401, DIN 24340 (CETOP 03)

The valve is used for directional and speed control of hydraulic appliances

Auxiliary lever actuator allows emergency spool control by hand when the solenoids are deenergised, e.g. in the case of electrical failures or maintenance activities

The flow rate can be controlled continuously and proportionally to command signal

The valve can be controlled directly by a current control signal or by means of the electronic control unit to fully exploit the valve performance. The electronic control

unit must be ordered separately

Wide range of solenoid electrical terminal versions available

The five chambers body design reduces the dependence of hydraulic power on fluid viscosity

The coil is fastened to the actuating system with a plastic nut and can be rotated by 360° to position suitable for the space available

In the standard version, the valve housing is phosphated for basic surface corrosion protection and as preparation for painting. Steel parts are zinc-coated for 240 h salt

spray protection acc. to ISO 9227

Enhanced surface protection for mobile sector available for the valve housing and steel parts (ISO 9227, 520 h salt spray)