Sub-Plates for Valves with a Body and Modular Valves

Total: 9

Show:

PD04

P max. bar (PSI)	Size
250 (3626)	Size 04 (D02)

P max. bar (PSI)	250 (3626)
Size	Size 04 (D02)

Description

Designed to connect in parallel two or more ISO 4401-02 (CETOP 02) valves to build compact hydraulics on each axis vertically

Stackable models (Version S5) with mounting interface for SMA 05 hydraulic power unit central block

Flexible design of various stackable plates enables simple creation of circuits without the use of pipes and fittings

Maximum 8 parallel modular valve sections may be installed. Optional selection for A and B consumer ports position

Maximum flow rate can be increased up to double the output if the sub-plates are powered at both ends

Serial plates are available in aluminium. For other materials consult our technical department for their identification and feasibility

Includes mounting stud kits for horizontal plate assembly

BSP and SAE porting

In the standard version, the aluminium serial plate is without surface protection

DR1-04

P max. bar (PSI)	Size
320 (4641)	Size 04 (D02)

P max. bar (PSI)	320 (4641)
Size	Size 04 (D02)

Description

Designed to connect in parallel two or more ISO 4401-02 (CETOP 02) valves with integrated unloading and pressure relief valve cavity with interface 3/4-16 UNF-2A

Compact design with reduced plate dimensions for production cost saving

Maximum 8 parallel modular valve sections

Consumer ports A and B positioned on the side of the sub-plate

Maximum flow rate can be increased up to twice the output if the sub-plates are powered at both ends

Serial plates are available in aluminium EN AW - 7075 T6

In the standard version, the aluminium serial plate is without surface protection

PD06

P max. bar (PSI)	Size
250 (3626)	Size 06 (D03)

P max. bar (PSI)	250 (3626)
Size	Size 06 (D03)

Description

Designed to connect in parallel two or more ISO 4401-03 (CETOP 03) valves to build compact hydraulics on each axis vertically

Stackable models (Version S5 and Z6) with mounting interface for SMA05 or ZB06 hydraulic power unit central block

Flexible design of various stackable plates enables simple creation of circuits without the use of pipes and fittings

Maximum 6 parallel modular valve sections may be installed. Optional selection for A and B consumer port positions

Maximum flow rate can be increased up to double the output if the sub-plates are powered at both ends

Serial plates are available in aluminium. For other material consult our technical department for their identification and feasibility.

Includes mounting stud kits for horizontal plate assembly

BSP and SAE porting

In the standard version, the aluminium serial plate is without surface protection

DR2-06

P max. bar (PSI)	Size
350 (5076)	Size 06 (D03)

P max. bar (PSI)	350 (5076)
Size	Size 06 (D03)

Description

Designed to connect in parallel two or more ISO 4401-03 (CETOP 03) valves with integrated unloading and pressure relief valve cavity with interface 7/8-14-UNF-2A

Compact design with reduced plate dimensions for production cost saving

Maximum 10 parallel modular valve sections

Consumer ports A and B positioned on the side of the sub-plate

Maximum flow rate can be increased up to twice the output if the sub-plates are powered at both ends

Serial plates are available in aluminium EN AW - 7075 T6 and steel

In the standard version, the aluminium serial plate is without surface protection and the steel plate is zinc-coated for 520 h protection acc. to ISO 9227

PD10

P max. bar (PSI)	Size
250 (3626)	Size 10 (D05)

P max. bar (PSI)	250 (3626)
Size	Size 10 (D05)

Description

Designed to connect in parallel two or more ISO 4401-05 (CETOP 05) valves to build compact hydraulics on each axis vertically

Stackable models (version Z6 and Z10) with mounting interface for ZB06 or ZB10 hydraulic power unit

Flexible design of various stackable plates enables simple creation of circuits without the use of pipes and fittings

Maximum 6 parallel modular valve sections may be installed. Maximum flow rate can be increased up to double the output if the sub-plates are powered at both ends

Serial plates are available in aluminium. For other material consult our technical department for their identification and feasibility

Includes mounting stud kits for plate assembly

In the standard version, the aluminium serial plate is without surface protection

DK1-04 (06, 10)

P max. bar (PSI)	Size
320 (4641)	Size 04 (D02) Size 06 (D03) Size 10 (D05)

P max. bar (PSI)	320 (4641)
Size	Size 04 (D02) Size 06 (D03) Size 10 (D05)

Description

Mounting interface acc. to ISO 4401, DIN 24340 (CETOP 02, 03, 05)

Wide range of hydraulic connections

NBR and Viton seals

Enhanced surface protection for mobile sector up to 520 h salt spray acc. to ISO 9227

DM04 (06, 10)

P max. bar (PSI)	Size
250 (3626)	Size 04 (D02) Size 06 (D03) Size 10 (D05)

P max. bar (PSI)	250 (3626)
Size	Size 04 (D02) Size 06 (D03) Size 10 (D05)

Description

Modular plate with side outlets for pressure sensing, pressure control signal or to connect individual parts to the circuit

Subplate mounting interface acc. to ISO 4401, DIN 24340 (CETOP 02, 03 and 05) Size 04, 06 and 10

Wide range of varied connection plates

Plate material – Aluminium, EN AW-7075 T4

DA-06/04, 10/06

P max. bar (PSI)	Size
350 (5076)	Size 06/04 (D03/D02) Size 10/06 (D05/D03)

P max. bar (PSI)	350 (5076)
Size	Size 06/04 (D03/D02) Size 10/06 (D05/D03)

Description

Adaptor plates Size 06 / Size 04 and Size 10 / Size 06 (manifold side / valve side)

NBR or Viton seal rings

Steel plates are zinc-coated for 520 h protection in NSS acc. to ISO 9227

Two types of adaptor plates Size 10 / Size 06

• low cost type interchanges the channels A and B each other (Model No. 2)

• standard type preserves the A-A and B-B connection (Model No. 3)

DP-04 (06, 10)

P max. bar (PSI)	Size
350 (5076)	Size 04 (D02) Size 06 (D03) Size 10 (D05)

P max. bar (PSI)	350 (5076)
Size	Size 04 (D02) Size 06 (D03) Size 10 (D05)

Description

Subplates for individual mounting of hydraulic components in hydraulic circuits with connections realized by tubes or hoses

Universal subplates to connect any components with installation dimensions acc. to ISO 4401, (DIN 24340 and CETOP)

installation dimensions of Size 04: ISO 4401-02-01-0-05, (CETOP 02 - RP121H)

installation dimensions of Size 06: ISO 4401-03-02-0-05, (DIN 24340-A6)

installation dimensions of Size 10: ISO 4401-05-04-0-05, (DIN 24340-A10)

Special subplates - see survey of applications

The subplate surface is phosphated

The top ground surface with mounting pattern acc. to ISO 4401 is protected with a transport plate

No variants were found for this product

Unfortunately, we couldn't find any product variants for the selected product.

Related Products

Discover compatible accessories and complementary products for your selection.

SMT

• Designed to achieve standardization based on each thread size

• Reduce the amount of tooling required to cover the valve range

• UNF...