4/2 and 4/3 Solenoid Operated Directional Control Valves

Q max. l / min (GPM)	P max. bar (PSI)	Size
30 (8)	320 (4641)	Size 04 (D02)

Description

Direct acting, directional control valve with subplate mounting interface acc. to ISO 4401, DIN 24340 (CETOP 02)
High transmitted hydraulic power up to 320 bar with optimized design to minimize pressure drop
Three chamber housing design for production cost saving
The coil is fastened to the core tube with a retaining nut and can be rotated by 360° to suit the available space
The valve is available with interchangeable DC solenoids, also for AC power supply using a built-in rectifier bridge
Wide range of solenoid electrical terminal versions available
CSA Certificate upon request
Inductive contactless Normally Open and Normally Closed spool position sensor option
In the standard version, the valve housing is phosphated for basic surface corrosion protection and as preparation for painting
Steel parts are zinc-coated for 240 h salt spray protection acc. to ISO 9227
Enhanced surface protection for mobile sector available for the valve housing and steel parts (ISO 9227, 520h salt spray)

Q max. l / min (GPM)	P max. bar (PSI)	Size
80 (21)	350 (5076)	Size 06 (D03)

Description

Direct acting, directional control valve with subplate mounting interface acc. to ISO 4401, DIN 24340 (CETOP 03)
High transmitted hydraulic power up to 350 bar with optimized design to minimize pressure drop
Five chamber housing design with reduced hydraulic power dependence on fluid viscosity
The valve is available with interchangeable DC solenoids, also for AC power supply using a built-in rectifier bridge
Wide range of solenoid electrical terminal versions available
Wide range of interchangeable spools and manual overrides available
CSA Certificate upon request
Inductive contactless Normally Open and Normally Closed spool position sensor option
Soft-shift spool speed control option
The coil is fastened to the core tube with a retaining nut and can be rotated by 360° to suit the available space
In the standard version, the valve housing is phosphated for basic surface corrosion protection and as preparation for painting
Steel parts are zinc-coated for 240 h salt spray protection acc. to ISO 9227
Enhanced surface protection for mobile sector available for the valve housing and steel parts (ISO 9227, 520h salt spray)

Q max. l / min (GPM)	P max. bar (PSI)	Size
60 (16)	350 (5076)	Size 06 (D03)

Description

Solenoid operated directional control valve, spool type, with subplate mounting surface acc. to ISO 4401, DIN 24340 (CETOP 03) standards
Robust design of coil with high resistance to mechanical damage
Encapsulation enclosure solenoid version (m)
High transmitted hydraulic power
Operating pressure up to 350 bar, pressure in T- channel up to 210 bar
Low pressure drop achieved by design optimization
Five chambers housing design with reduced hydraulic power dependence on fluid viscosity
Wide range of interchangeable spools, optional type of manual override
Easily interchangeable coil with adjustable connector position by rotating the coil
In the standard version, the valve is zinc-coated for 520 h protection acc. to ISO 9227

Q max. l / min (GPM)	P max. bar (PSI)	Size
140 (37)	350 (5076)	Size 10 (D05)

Description

Direct acting directional control valve with subplate mounting interface acc. to ISO 4401, DIN 24340 (CETOP 05)
High transmitted hydraulic power up to 350 bar with optimized design to minimize pressure drop
Five chamber housing design with reduced hydraulic power dependence on fluid viscosity
The valve is available with interchangeable DC solenoids, also for AC power supply using a built-in rectifier bridge
Wide range of solenoid electrical terminal versions available
Wide range of interchangeable spools and manual overrides available
Inductive contactless Normally Open and Normally Closed spool position sensor option
Soft-shift spool speed control option
The coil is fastened to the core tube with a retaining nut and can be rotated by 90° to suit the available space.
In the standard version, the valve housing is phosphated and steel parts zinc-coated for 240 h salt spray protection acc. to ISO 9227.
Enhanced surface protection for mobile sector available (ISO 9227, 520 h salt spray)

Your Partner for Innovative Solutions