Contact Trade shows & Events

LubMon Visu

LubMon Visu

Communication Interfaces
3x 8-pole switch contact * 1x USB * 1x SD-card slot * 1x LCD Display * 1x membrane keyboard
Communication Interfaces 3x 8-pole switch contact * 1x USB * 1x SD-card slot * 1x LCD Display * 1x membrane keyboard
Description

LubMon Visu is a display unit, suitable for panel-mounting, with integrated data memory for connection of various sensors. ARGO-HYTOS offers a wide range of compatible sensors for monitoring of hydraulic and lubricating fluids. These are amongst others particle monitors, temperature, humidity and oil aging sensors as well as sensors for monitoring of the filter lifetime.
Furthermore any sensor with analog current output may be connected e. g. for filter monitoring.

Two sensors with serial interface as well as two sensors with analogue interface  may additionally be  attached to the LubMon Visu.
The recorded measured values are collected in the data memory and may be copied onto a SD-memory card if desired. 
By means of the integrated display, the current measured values as well as the stored data may be indicated with timestamp.

Navigation through the data and the operating menu is carried out over six keys at the front side of the module. Besides of the 
graphical display, alarms and status information are shown by four LEDs. 
Communication with a processor or a SPS is effected by USB 2.0 or optionally by Ethernet. In order to activate the switch signals, there are also three potential-free switch contacts available. Optionally the printer, listed under accessories, may be connected to the module.

LubMon Visu Ethernet

Communication Interfaces
1x RJ45 * 3x 8-pole switch contact * 1x USB * 1x SD-card slot * 1x LCD Display * 1x membrane keyboard
Communication Interfaces 1x RJ45 * 3x 8-pole switch contact * 1x USB * 1x SD-card slot * 1x LCD Display * 1x membrane keyboard
Description

LubMon Visu is a display unit, suitable for panel-mounting, with integrated data memory for connection of various sensors. ARGO-HYTOS offers a wide range of compatible sensors for monitoring of hydraulic and lubricating fluids. These are amongst others particle monitors, temperature, humidity and oil aging sensors as well as sensors for monitoring of the filter lifetime.
Furthermore any sensor with analog current output may be connected e. g. for filter monitoring.

Two sensors with serial interface as well as two sensors with analogue interface  may additionally be  attached to the LubMon Visu.
The recorded measured values are collected in the data memory and may be copied onto a SD-memory card if desired. 
By means of the integrated display, the current measured values as well as the stored data may be indicated with timestamp.

Navigation through the data and the operating menu is carried out over six keys at the front side of the module. Besides of the 
graphical display, alarms and status information are shown by four LEDs. 
Communication with a processor or a SPS is effected by USB 2.0 or optionally by Ethernet. In order to activate the switch signals, there are also three potential-free switch contacts available. Optionally the printer, listed under accessories, may be connected to the module.

LubMon Visu Bluetooth

Communication Interfaces
Bluetooth * 3x 8-pole switch contact * 1x USB * 1x SD-card slot * 1x LCD Display * 1x membrane keyboard
Communication Interfaces Bluetooth * 3x 8-pole switch contact * 1x USB * 1x SD-card slot * 1x LCD Display * 1x membrane keyboard
Description

LubMon Visu is a display unit, suitable for panel-mounting, with integrated data memory for connection of various sensors. ARGO-HYTOS offers a wide range of compatible sensors for monitoring of hydraulic and lubricating fluids. These are amongst others particle monitors, temperature, humidity and oil aging sensors as well as sensors for monitoring of the filter lifetime.
Furthermore any sensor with analog current output may be connected e. g. for filter monitoring.

Two sensors with serial interface as well as two sensors with analogue interface  may additionally be  attached to the LubMon Visu.
The recorded measured values are collected in the data memory and may be copied onto a SD-memory card if desired. 
By means of the integrated display, the current measured values as well as the stored data may be indicated with timestamp.

Navigation through the data and the operating menu is carried out over six keys at the front side of the module. Besides of the 
graphical display, alarms and status information are shown by four LEDs. 
Communication with a processor or a SPS is effected by USB 2.0 or optionally by Ethernet. In order to activate the switch signals, there are also three potential-free switch contacts available. Optionally the printer, listed under accessories, may be connected to the module.

Your Partner for Innovative Solutions

 We combine expertise, innovation, and reliability to deliver solutions tailored to your business. Discover our capabilities and get in touch to discuss your next project. 

Inquire directly Discover our capabilities