Overcentre Valves Fully Balanced

Total: 2

Show:

SOB5A-BP3

Q max. l / min (GPM)	P max. bar (PSI)	Size
40 (11)	420 (6092)	7/8-14 UNF

Q max. l / min (GPM)	40 (11)
P max. bar (PSI)	420 (6092)
Size	7/8-14 UNF

Description

The valve prevents runaway ahead of the pump in the event of a negative load

Load-holding with leak-free closing poppet when the directional control valve is in neutral position

Pressure relief function protecting the actuator against overloading and pressure peaks

Integrated check valve acting as an anti-cavitation valve

When installed close to actuator the valve can be used as a hose burst valve

Back pressure has got negligible effect on relief setting nor the required pilot pressure

Setting can be performed during machine operation = leak free closing of adjustable element

Wide range of relief pressure setting up to 420 bar (6100 PSI)

In the standard version, the valve is zinc-coated for 520 h protection acc. to ISO 9227

SOB5A-CP3

Q max. l / min (GPM)	P max. bar (PSI)	Size
80 (21)	350 (5076)	1-1/16-12 UN

Q max. l / min (GPM)	80 (21)
P max. bar (PSI)	350 (5076)
Size	1-1/16-12 UN

Description

The valve prevents runaway ahead of the pump in the event of a negative load

Load-holding with leak-free closing poppet when the directional control valve is in neutral position

Pressure relief function protecting the actuator against overloading and pressure peaks

Integrated check valve acting as an anti-cavitation valve

When installed close to actuator the valve can be used as a hose burst valve

Back pressure has got negligible effect on relief setting nor the required pilot pressure

Setting can be performed during machine operation = leak free closing of adjustable element

Wide range of relief pressure setting up to 350 bar (5100 PSI)

In the standard version, the valve is zinc-coated for 520 h protection acc. to ISO 9227

No variants were found for this product

Unfortunately, we couldn't find any product variants for the selected product.

Related Products

Discover compatible accessories and complementary products for your selection.

SB-04 (06, 10)

Designed for vertical assembly of built-in two-way and three-way valves in hydraulic circuits

Subplate mounting interface acc. to ISO 4401,...

SMT

• Designed to achieve standardization based on each thread size

• Reduce the amount of tooling required to cover the valve range

• UNF...