Your project – successful with us
As a system partner, ARGO-HYTOS responds to the individual needs of its customers - read selected user reports and success stories here.
Oil Service Units for Fuchs® - With high-performance filters to ensure oil quality
The mobile oil service units from ARGO-HYTOS were developed to ensure or restore the oil cleanliness and quality of fresh oils as well as hydraulic media in use.
At Fuchs®, a renowned manufacturer of handling machines, the mobile oil service units are used in end-of-line quality assurance.
Find out here, how ARGO-HYTOS' oil service units contribute to high cost savings and ensure sustainable use of resources from day one.
EXAPOR®SPARK PROTECT - Protection against electrostatic discharge and its consequences
A complex filter system consisting of return filters & and high-pressure filters was to be designed for a new series of construction service tractors. The particular challenge was that there was a risk of electrostatic charging and discharging in the hydraulic system of this application.
Find out here, how ARGO-HYTOS' EXAPOR®SPARK PROTECT filter elements meet these requirements and how they could be optimally tailored to the customer‘s needs, ensuring a trouble-free and safe operation of the vehicles.
STUMMER Kommunalfahrzeuge GmbH: off-line filter unit for garbage truck
STUMMER, a specialist for garbage trucks, was struggling with contamination or water in the hydraulic system of their machines. There was a requirement to integrate a bypass filter in addition to the pressure and return filters already installed.
Find out here, how ARGO-HYTOS found together with their sales partner HAINZL, who supports STUMMER in Austria, a perfect solution by the off-line filter unit FNS040G incl. EXAPOR® AQUA filter element which is both compact and offers a very good filter performance.
Seeding rate control using proportional valve technique
The aim of precision farming is to control the individual drives of agricultural machinery in such a way that the machines work as efficiently, economically and ecologically as possible, which places certain demands on the hydraulics in these systems – an exceptionally good control performance with low to no losses, regarding both the individual components and the system as a whole.
Read here how ARGO-HYTOS developed a solution which can not only be used in a seed drill as in the customer's request, but also in all other applications where precise speed control of rotary drives is required.
Valves for agricultural machinery gears
For decades, ARGO-HYTOS has been reliably supplying high-quality hydraulic 3/2 switching valves as well as proportionally controlled pressure regulating valves to renowned transmission and tractor manufacturers, which are used in both powershift and continuously variable transmissions.
Discover all the advantages of the valves here, which are precisely tailored to the pressure range in agricultural machinery transmissions (up to max. 50 bar) and thus offer exactly the performance required in these applications in accordance with the ARGO-HYTOS motto "Just Enough".
AGCO Fendt: Central control block for a narrow-track tractor
Being a long-term supplier of hydraulic components to the renowned tractor manufacturer AGCO Fendt, the customer offered ARGO-HYTOS the opportunity to provide solutions for the application „central control blocks for working hydraulics“ for the narrow-track tractor 200 V/F/P Vario, which is mainly used in fruit and wine growing.
Read here how a very compact and optimized solution could be developed.
Electric steering in wheeled excavator from ATLAS
Classically, the steering of a wheeled excavator is done via the steering wheel.
The electric steering system introduced by ATLAS allows the driver to steer directly via the joystick, making work easier.
ARGO-HYTOS took up the challenge not only to improve this system and reduce costs, but also to develop a compact unit together with ATLAS that can be positioned in the vehicle to save space.
Read in our latest Success Story, how ARGO-HYTOS improved the customer's existing system in a very short time and reduced the installed components and system costs.
Suction filter with hose connection up to DN 60
A renowned manufacturer of telescopic handlers was faced with the challenge of finding a more economical suction filter for a tank system already in use. The suction filter used so far was not easy to install and too expensive.
Read in our latest success story how ARGO-HYTOS made use of its decades of experience in the field of mobile hydraulics and was able to develop a robust suction filter for pump protection in hydraulic and lubrication systems by applying the latest production techniques in the field of plastics technology.
The monitoring solution for gears in the mining sector
Drive gears in the mining sector are exposed to extreme loads, which can lead to high wear in the gearbox and, in the worst case, to failure. To increase the reliability of the gearboxes and to detect damage at an early stage, ARGO-HYTOS has developed the OPCom FerroS wear sensor.
Read here how it helps to monitor the gearbox in real-time and prevents sudden production downtimes by early warning.
Ultimate solution to applications where the flow direction changes
With the modernization and multi-functionality of hydraulic systems, it is common for a jack-up barge, for example, to have more than 30 closed hydraulic sub-circuits with flow rates of up to several hundred liters per minute, in which the flow direction is constantly changing.
Read our latest success story to learn how ARGO-HYTOS bi-directional high pressure filter assemblies allow hydraulic fluids to flow in both directions while maintaining the highest standard of filtration efficiency.
High-pressure safety filter series HD 040/081/150
Since the operating time of high tech harvesters is very limited due to the annual harvesting window, it is essential to ensure maximum machine availability in this respect.
Read here how ARGO-HYTOS optimized the customers filter system used as wear protection in the hydraulic system to provide increased functional protection on the basis of an optimum cost-benefit ratio.
Digitalization in Mass Production: Online Condition Monitoring
For factories engaged in mass production one of the most important goal is to ensure that the production process is not interrupted at any times.
As the biggest source of failures and problems in hydraulic systems is oil contamination, read here how smart particle monitors by ARGO-HYTOS help to avoid unplanned downtimes and increase both the efficiency & lifetime of the machine.
Tank-mounted return filter kits RFI 206 / 406
For a new generation of agricultural machinery, a future-proof return filter system consisting of as few components as possible had to be developed, which could be ideally integrated into plastic tanks.
Read here how ARGO-HYTOS has developed an innovative return filter system in which the oil flows into the filter element at the bottom which ensures the optimum separation of air from the hydraulic oil at the lowest outflow rates.
New pressure filter PFL-232 for the filtration of cooling lubricants
During machining processes, chips and smaller particles inevitably get into the cooling lubricant. The more efficiently these are removed from the lubricant, the more reliably the machining center works.
Find out here how ARGO-HYTOS developed an economical cooling lubricant filter system for a customer in the market segment of industrial hydraulics.
Tank-mounted return filter E 451-156 with AirEX air separation
Air in hydraulic fluids can have several serious effects in the hydraulic system: dynamic operating problems due to increased compressibility, accelerated oil aging / micro- diesel effect, temperature increase, efficiency losses in pumps, cavitation damage to components and noise generation.
Please click here and read how a new type of air separation system for return filters developed by ARGO-HYTOS helped a customer to avoid these problems.
Return Filter -Series RFI 606 / 1006
Compared to the currently used tank com-partment solution, a future-proof and robust return filter concept was to be developed for new generations of wheeled excavators, which could be more easily integrated into the tank.
Please click here and read how a new filter series was developed together with the customer, combining many detailed solutions from familiar ARGO-HYTOS filters in a unique manner.
Return filter series E 454-156 VD
ARGO-HYTOS was faced with the challenge of offering a filter system to a manufacturer of hydraulic units for CNG pumping stations that was optimally tailored to his needs and ensured trouble-free operation of the plant.
Please click here to read the full success story about the advantages of the ARGO-HYTOS filter with a flow capacity for this system that fully takes into account the cylinder ratio.
Suction filter, tank mounting
Series ES 075
The demand for maximum availability of mobile construction machinery also leads to constantly increasing requirements regarding oil cleanliness.
Please click here to read the full success story and learn about the advantages of the modern and reliable suction filter system by ARGO-HYTOS.
Oil cleaning on lifting platforms
with FAPC 016
To optimize the time factor in the oil cleaning process of its platforms, Palfinger was looking for a suitable filter unit with direct oil cleanliness indication on the filter units and a high volume flow.
Please click here and read how ARGO-HYTOS' oil service unit FAPC 016 improves the process and has been adapted precisely to the customers' needs.
Expansion of the
pressure filter series
D 072/D 112/D 152
Our customer needed a cost-effective filter system, which not only had the necessary features, but was also backwards compatible and could be integrated quickly and easily into all machines.
Please click here to read how ARGO-HYTOS took advantage of its broad product range and created the ideal solution based on existing components.
Service companies in the wind power industry:
ARGO-HYTOS filter elements in after-sales
With currently around 30,000 wind turbines in operation only in Germany, there is an enormous demand for spare parts in the service / after-sales area.
Please click here to read the full success story of ARGO-HYTOS' cost-effective alternatives for filter elements in lubricating oil systems of wind power plants.
Flexible medium-pressure filter system
Series HD 037/HD 057/
HD 077/HD 097
The latest valve technology and the demand of modern mobile machinery for maximum availability lead to constantly increasing requirements regarding oil cleanliness.
Please click here to read the full success story and learn about the advantages of the new flexible medium-pressure filter system by ARGO-HYTOS.