We produce fluid power solutions

The basics of filtration technology explained

soo426 72dpi

Filtertechnik

AS080 72dpi

Ruecklauffilter 72dpi

Gruppe Druckfilter 72dpi

Gruppe Druckfilter 72dpi

VFT 2500 Freigstellt 72dpi

Filtration technology forms a central module in the range of components and systems offered by ARGO-HYTOS. Our numerous innovative solutions in the fields of industrial and mobile hydraulics would not be possible at all without filtration. But how exactly does filtration technology work? What does it do in plants and machines?

Read more about filtration technology here.

This is how a filter works

Filters act like a screen. They retain solids from fluid or gas streams. In the case of screens, a solids-free filtrate and a filter cake are produced from the captured solids.

However, the separation does not occur autonomously, but only as a result of the pressure difference in the transport medium upstream and downstream of the filter medium. For this pressure difference, the medium can be forced through the filter with positive pressure or sucked through it with negative pressure. Likewise, hydrostatic pressure or centrifugal force provides the drive of a filtration.

Filtration principles

In hydraulics, the following two filtration principles are the most common:

  • Surface filtration
  • Depth filtration

     

Surface filtration

These filters have geometrically defined gaps, the particles are separated on the surface. In the case of very high dirt accumulation, a filter cake grows on the filter (screen mesh), which acts like an additional filter as its thickness increases. This filter cake should be removed regularly to maintain control over the filtration process.

Depth filtration

Depth filters use nonwovens with chaotically arranged fibers, between which the solid particles are separated in depth. Cleaning of the filter material (e.g. glass fiber fleece) is not possible. Therefore, the filters must be replaced when they are completely contaminated. Depth filtration is mainly used where only the fluid is to be reused. Dirty filter inserts are disposed of.

Physics behind filtration

For filtration, filter media are selected whose gaps or pores are smaller than the size of the particles to be separated. In addition, the inertia of the dirt particles in fluid flows ensures separation on the filter material. In the case of gases, electrostatics also support filtration. For this purpose, the nonwoven filters used there receive an electrical charge in all their fibers.

Various filter media

Nonwovens made of cellulose, glass fiber or plastic are not only used for the filtration of gases. They are used just as much for the filtration of fluids as for

  • fabrics made of plastic or metal wires,
  • porous solids (mostly sintered metals) and
  • bulk materials.

In the future, nanofilters will provide even more refined filtration.

Often, modern filter materials are still chemically or physically treated to increase or optimize their natural filter properties.

Which filter media does ARGO-HYTOS use?

In our suction filters for tank installation, for example, you will find screen mesh made of closely woven polyester wires. This has a mesh size of 135 micrometers or 0.135 millimeters, for example.

Other filters, such as our return flow filters for in-line installation, achieve even more. With multilayer glass fiber fleeces, they even retain particles smaller than ten micrometers or 0.01 millimeters in size.

 

These two examples from the ARGO-HYTOS portfolio of filter technology show you the precision that is possible in filtration today - and we are constantly developing it further.

This is done, for example, with the EXAPOR®MAX 3 filter elements, the successors to our successful EXAPOR®MAX 2 model. The third generation of this filter design reduces pressure loss by up to 20 percent once again. It also has up to 15 percent greater dirt-holding capacity and many other advantages.

You can see these day after day in your plants: with higher machine availability, longer maintenance intervals and lower operating costs.

 

Important features of a filter

The quality or efficiency of a filter can be recognized by various specifications or features. We will briefly discuss these below.

Filtration ratio and separation efficiency

The filtration quotient ß is calculated similarly to an efficiency as the ratio of the particle count before the filter and the particle count after the filter. The filtration efficiency processes the filtration quotient to show as a percentage how efficiently a filter separates dirt particles from a fluid.

Dirt-holding capacity

There are two specifications for this feature: absolute dirt holding capacity in grams and specific dirt holding capacity in milligrams per square centimeter. Both are only used in connection with depth filters.

Pressure drop

When fluids flow through a filter, there is regularly a pressure drop. There is an initial pressure drop for any filter that is not yet in use. The more dirt is retained, the greater the pressure rise at the filter. This effect is also used by clogging indicators to indicate the optimum time for filter maintenance.

Cleaning

Robustly constructed surface filters by ARGO-HYTOS can be cleaned up to 3 times. Depth filters, used for medium dirt accumulation and flowed through with nominal volume flow, can be used for at least 1000 operating hours. In principle, replacement is recommended once a year. By the way: 1000 operating hours correspond to a mileage of 60000 km for a passenger car.

Which filtration technology does ARGO-HYTOS offer?

Our hydraulic drives for industrial and mobile hydraulics operate with various oils and lubricants. Even in optimum quality, new oils contain too many contaminants and should not be filled in unfiltered. The size of these dirt particles is usually only in the range of a few micrometers, which makes them invisible to the human eye. Nevertheless, this is enough to cause long-term damage to plant or machinery.

Then the first thing that happens is more frequent plant breakdowns with the need for repairs and expensive downtime. Overall, the service life of the machines decreases, causing further high costs. In contrast, the investment in a suitable filter system is marginal. We integrate suitable filters directly into our systems or machines. However, we also offer individual filters for installation or retrofitting in your systems.

Suction filters

Suction filters are installed in tanks, on a suction connection or directly on the suction line of pumps. Suction filters protect precisely these pumps from contaminants that are sucked in from the tank. When planning a system, you must always take into account how the filters affect pump performance.

Suction filters are also not very suitable for fine filtration. In this case, they create too much negative pressure in the suction line.

Return filters

ARGO-HYTOS return filters are available as tank top filters, in-tank filters and in-line filters. In order to clean the returning oil before it enters the tank, the use of a return filter is recommended. It is installed directly on the tank or at the end of the return line.

Pressure filters

You integrate pressure filters directly after a pump in the pressure line. The filters then protect all downstream components. In addition to pressure filters up to approx. 100 bar operating pressure, we also offer high-pressure filters.

Filling and ventilating filters

You place these filters directly on your hydraulic tank. There, they provide filtration of the incoming air and thus prevent the entry of dirt from the atmosphere. The filter fineness of the ventilating filter should be finer than that of the finest filter in the hydraulic circuit.

Filter units

Off-line units filter the pressure fluid in a separate circuit. In this way, you relieve the filters in the main stream. This allows you to operate the entire system more efficiently.

What are the selection criteria for filter technology?

When selecting filters, pay attention to

  • Filter fineness - derived from the required oil cleanliness, 
  • Differential pressure or filtration stability, 
  • Size/duration and other installation criteria, 
  • Media compatibility as well as viscosity, 
  • Design conditions and 
  • Hydraulic conditions.

Check the operating conditions regularly and change the filter element according to the manufacturer's specifications or at least once a year. The cost of this will quickly pay for itself compared to that of defective equipment.

Simply get personal advice on filter technology and more from ARGO-HYTOS

For our complete product portfolio you will find detailed catalog sheets with all technical specifications for product selection on our website. Do you still have questions or do you require personal advice?

Then our competent customer service is available to you online or by phone. Let us advise you on individual filter systems and the appropriate component selection.

Subscribe newsletter