We produce fluid power solutions

All you need to know about a pressure reducing valve

Teamwork Web

A pressure reducing valve is a hydraulic component from the group of pressure valves that is used in line or hose systems. Also known as pressure regulating valves, the components regulate high or fluctuating inlet pressures in the system to a predefined outlet pressure. In this way, the valves keep the pressure constant.

Typical applications for pressure reducing valves are in industrial applications, agriculture or construction machinery. Here, pressure reducing valves enable, for example, the regulation of clamping pressures, the force control of cylinder drives or the torque control of hydraulic motors

How does a pressure reducing valve work?

A required pressure is set via the valve. As long as the set outlet pressure has not yet been reached, the valve remains open. When the actual pressure reaches the predefined set pressure, the inflow from the pressure medium is closed.

In the pressure reducing valve, there is a continuous adjustment between the set pressure and the actual pressure downstream of the valve. The higher the pressure downstream of the valve, i.e. the outlet side, rises, the further the valve of the pressure reducing valve is closed. When the target outlet pressure is reached, the valve is completely closed.

So-called pressure reducing valves with secondary pressure protection are a special design. With these valves, the maximum pressure at the valve outlet is limited. If the outlet pressure exceeds the set value, the valve opens the outlet in the direction of a connected tank.

Then the valve releases the medium from the line until the pressure in the line system drops. This happens until it is again below the desired limit value. Subsequently, the valve closes the pressure relief function again.

The function of the valves in the overview

  • The valves are mounted in line or hose systems.
  • A pressure is preset via the valve.
  • There is a continuous adjustment between the set pressure and the actual pressure.
  • The higher the pressure behind the valve rises, the further it is closed.

What types of pressure reducing valves are there?

Pressure reducing valves are divided into two groups according to their design principles: mechanically controlled and electrically controlled. The two groups can be subdivided again.

Mechanically direct controlled

Mechanically direct-controlled pressure reducing and relief valves such as the SP2A-A3/L from ARGO-HYTOS offer excellent stability over the entire volume flow range. They also ensure fast response times to pressure changes. As a control element, these valves use a spool on whose face the outlet pressure acts.

The pressure is adjusted by a spring on the opposite side of the spool. Mechanically direct-controlled valves allow precise pressure control, low pressure losses and small hysteresis. The possible flow rate is between 20 and 60 liters per minute, the maximum pressure between 320 and 420 bar.

Mechanically pilot operated

Mechanically pilot operated valves are suitable for applications where high accuracy and repeatability are required. Precise pressure control, low pressure losses and small hysteresis characterize the mechanically pilot operated valves. The possible flow rate is between 60 and 150 liters per minute, the maximum pressure between 320 and 350 bar.

Electrically proportional direct operated

Electrically proportional direct operated valves for pressure control are used, among other things, to control clutches in gearboxes of mobile machines. One example is the PP2P3-W3 from ARGO-HYTOS. The valves in piston design offer excellent stability over the operating range with the fastest response to load changes.

With this design principle, the reduced outlet pressure is proportional to the control flow. This ensures particularly accurate pressure control and excellent repeatability. An integrated relief function reliably protects against pressure peaks. The possible flow rate is between 20 and 40 liters per minute, the maximum pressure is 350 bar.

Electrically proportionally pilot controlled

Electrically proportional pilot operated valves such as the SP4P2-B3 consist of a pilot stage with valve and a main stage with threaded connection. The valves control the pressure at the consumer port continuously and proportionally to the control signal at the input. A flow rate flows through the pilot stage. It is required for controlling the output pressure and maintaining the set, reduced pressure.

In the event of an overload of the consumer, the circuit is protected against damage by high pressure. The design principle is characterized by the most accurate pressure control and low pressure losses with small hysteresis, as well as high flow rate performance. The possible flow rate is between 40 and 60 liters per minute, the maximum pressure up to 350 bar.

The mechanically and electrically controlled valves are available from ARGO-HYTOS either as screw-in valves or plug-in valves for block installation. Mechanically controlled valves from ARGO-HYTOS can still be used via intermediate plates for vertical stacking in accordance with ISO4401.

What are the selection criteria for pressure reducing valves?

There are four parameters to consider when selecting the appropriate variant of pressure control valves for specific applications:

     

  1. the pressure range to be processed at the inlet of the valve
  2. the required control pressure at the outlet of the valve
  3. the flow rate
  4. the desired adjustment options: mechanical or electrical

Our experts will be happy to talk to you personally at any time. They will answer all your questions about our valve technology and the selection of the right components for your individual needs. Contact us and let us advise you on our products without obligation!

What functions do pressure reducing valves perform in a machine?

What functions do pressure reducing valves perform in a machine?

Pressure reducing valves from ARGO-HYTOS perform a wide variety of tasks in mechanical and plant engineering, in vehicle or construction machinery technology. A typical application in mechanical engineering is the control of clamping pressures, for example for hydraulic chucks on lathes. They are also used for clamping tools in collets.

In vehicles, pressure reducing valves are used to actuate the brakes or clutch. The valves are also commonly used for force control of cylinder drives or torque control of hydraulic motors. The high-quality pressure reducing valves from ARGO-HYTOS are also used for the adjustment of pressure forces, for weight compensation or the relief of heavy machine parts.

In which industries is valve technology from ARGO-HYTOS used?

Pressure reducing valves, proportional valves or throttle check valves from ARGO-HYTOS are used in various industries. The high-quality, durable and robust pressure reducing valves are used in numerous industrial sectors.

Pressure reducing valves are ideally suited for all applications where maximum precision and reliability are required. This is ensured by precise control of the outlet pressure, compact designs and high-precision manufacturing. In addition to machines, plants and equipment in production and manufacturing, our valves also work in agricultural and construction machinery or municipal vehicles.

We would be happy to convince you of the numerous advantages of valve technology from ARGO-HYTOS in a personal meeting and inform you about possible industrial applications. Do you need competent support in selecting the right valve or would you like to discuss a very specific project with our experts?

Then contact us via form or call our team! We are already looking forward to being able to inspire your company with our performance.

 

 

 

Subscribe newsletter